Search Engine www.edaboard.com

34 Threads found on edaboard.com: Cst Install
i have made a youtube video on how to install cst 2014
cst service packs will contains updates and fixes for issues found in initial version. however, its not a must to install service packs. base installation should work well in terms of accuracy.
I am using Windows 8.1 and I have tried to install cst Studio 2011 but failed. Now cst Studio 2013 successfully installed and opened. But when I tried to create a project it shows the following error. 98943 What should I do to make cst 2013 workable ?[/QUOplz mo plz mohammad, i need it ,h
Anyone knows how to install cst2011, could you help me through Teamviewer if possible. Thanks
Hi, you can see the example of designing a folded dipole in Example. It is in the driver that you install cst program. Program Files ==>cst STUDIO SUITE ==>Examples ==>MWS==>Transient ==>Antennas :-P
Its very similar to other softwares. Once installation is over use the license manager to locate the .lic file provided by cst. Hope this help you.
Hello, I have install cst 2010 SP1 on my new computer wich have windows 7 pro SP1, 64-bit oparition system. The installation went well and the program it working BUT when i tryed to simulat anything on it, it's stop working and not respanding. I tryed give it some time but its remain the same. I tryed re-installition but (...)
Hello Sujit if you have downloaded from the cst website along with the license. Then you should be getting a complete instruction set how to install,refer to the installation help file. Regards Sajid Mohammed.
Hello, I Already Download cst Microwave studio setup from Internet. 1)Tell me -Procedure to install cst Microwave2011. 2) How to run SP3 package (.sup file). 3) How to open ".sup" file.
i download cst STUDIO SUITE 2010 with cstpatcher.exe i need to know how to install it i flow 1) run cst License Manager and Stop Service, close cst License Manager 2) edit license.dat: change localhost in 1-st line with your real HostName 3) for work with standalone cst Microstripes 2009 (...)
hi i install the cst EM STUDIO 2010, but its transient solver tab doesn't work and is off.how can i repair it an simulate the design? thanks.
Hi, I'm having problem in displaying farfield polar plot in cst 2009 sp6. Transient solver runs perfectly but when I click the farfield plot properties and change from 3d to polar, it only shows: "result unavailable" I tried to install it back into original version (downgrade from sp6). I can display the polar plot but when I run the transient
How to install cst in Fedora and use it? any ref? Thanks
Hello, I try to install the SP7 for cst and it keeps saying: "the file modeler_AMD64.exe was modified from it's original version" and the service pack will not install becuase of the error. Anyone seen this and know how to circumvent? thanks.
Hello, did anyone experience sudden crashes with system reboot while running an optimization on cst MWS 2008? Despite I have tried a clean system install, while I try to optimize some parameters of a normal biquad antenna, just to achieve experience with this suite, I could never successfully end the task. My system is as follows: XP SP3 on a 50 GB
Can everybody help me how to find Licence the cst service pack 2003? i can install it but i don't know why it doesn't open, and appears a message,tells the licence doesn't work Please help me thanks me
go to download and install it for evaluation 4 or 5 antenna for free from list of 100 horn one of them you build it in magus and then export to cst all done automatically with parameters so try it.
i have cst 2006, which runs perfectly fine on my xp system. but i want to install the cst 2006 into vista! it does the whole installation, at the end when starting services, it will stop, and roll back the whole installation. i have administrative powers. and i ran the installer as (...)
As for HFSS, u must right click on the .exe file and set 'XP service pack 2 compatibility'. It works. Concerning cst, should the same thing.
Anybody use cst to simulate Allegro PCB board? I can only import DXF file or Gerber file,but the software help file says that Allegro can create some file formats that cst can read. who can tell me this direct way?
hi, I'am working with cst (version 4.2), I formatted my computer (windows xp pack2 for to install windows xp pack2. the same version of windows) for virus problems and now i can't install cst! cst software ask me to retry again the step: remove sentinel drives then install sentinel drivers (...)
Hi, I tried to install cst Microwave Studio 2006 on Windows Vista platform. Everything went fine but at the last step of installation when it says: STARTING SERVICES, the installation roll backs. Previously, I was using a XP based laptop and now bought a new Vista based. Could you please advise me some wayout? Cheers...
I installed cst 2006 at a laptop which uses Intel(R) GM965 graphic chipset (Lenovo T61). When I opened a example file or created a new file, the computer is freezed, and the computer screen changes in very weird color. It seems that the graphic card is incompatible with cst, but I'm not sure. Is there any body who fixed this problem?
Hello, Can somebody explain me how to install Service Pack (.sup file) for cst 2008 on a linux installation? Thank you for all TaPa
yes, it gives problems on windows 64bit, however it can run on windows 32bit on a 64 bit machine, I think you need the 64bit version of cst Microwave Studio
If I may elaborate on Plasma's tip about de-embedding (using cst) : 1. Go to your Waveguide (WG) port definitions. Set the reference plane distance as your feedline length, you should b able to see a port outline set right on the edge of the MS antenna. 2. Run the simulation as you did before. 3.a. Go to "1D results", check the Smit
cst MWS is based on FIT, u can start your learn from two documents -- getting start and tutorials, in "documentation" fold which is direct in cst install fold.
yes, They have a very quick support team :-) I just received an email from them. The problem seems to be related to the flexlm drivers. Apparently, there are no 64 bit flexlm drivers yet. But there is a possible solution. cst provies a temporary floating license. One can install it on a 32 bit machine. By using the 32 bit machine as the license s
2peter7488 When you install network computing - cst just create and start special service by default under LOCAL SYSTEM account. Usually such account hasn't privelege for access to your shared folder. You need to chose another option (it's available in MWS v5.1 ) and create service with your current account or you need manualy change pro
Well... with a little help of ready-made macros... Here it is: Feel free to test it... mogwai. ps. copy it into /macros directory under the main MWS install path... Hi all! I'll try to setup a VBA script in order to plot VSWR circles in Microwave Studio's Smith Plots. Have anyone done this already and likes to share his/her expe
I have studied cst for a few days.And I mainly simulate antennas in cst.But I find the precision of the result is not very well,so I want to ask whether I don't know some important parameter setup or not ! Is the mesh property very importan? Who can tell me ? Thanks a lot !
Hi all! Does anyone know where can I find the example of the Helix Antenna at cst-Microwave. Any link will be welcome. Regards, (S)O.S :wink: Hi! You can found it with your cst examples in its install dir. You have to install full version (not only the service pack!) regards, eirp
Hi All, I am now playing with hfss 9. It is interface has been greatly improved but what I find is that it is very similar to that of cst microwave studio. I wonder if anyone have tutorial materials on hfss9? Also, it seems that the nice feature of macro language has been removed. Is it really the case? or my install is not correct. Mesfe
could you please elaborate about the "a lot of RAM" of HFSS and "a high performance computer" of cst. My laptop 2.2GHz, 1Gb RAM, I'm wondering if it could stand with them!?