41 Threads found on edaboard.com: Fsk And Psk
Can any body guide me the difference between average probability of bit error for fsk system and for psk system ??? Why one (fsk) follows Rician probability function and other follows Gaussian density function, concept wise can any body explain this, Plz do guide me.
More over what is the minimum input (...)
RF, Microwave, Antennas and Optics :: 11-23-2013 07:43 :: abhijitrc :: Replies: 2 :: Views: 363
i want to know that which modulation schemes gives us best result in PSTN network if we use compression algorithms i.e. adpcm for noisy channel.
my channel is noisy. i want to use ADPCM for data compression and alone with this i want to check which modulation scheme will perform good (psk, fsk or QAM)
plz guide me in better way
Elementary Electronic Questions :: 11-03-2013 06:00 :: mfawan :: Replies: 0 :: Views: 725
I have generated digitally modulated signals such as ASK, fsk, psk and I have done feature extraction for all these signals and saved those feature values in the database. Now when the tested signal is one of these signals, How do I set threshold value for these feature values to determine the feature value (...)
Digital communication :: 04-09-2013 05:45 :: Shruti01 :: Replies: 2 :: Views: 483
hi folks, i am having problems in finding literature to learn the very basics of digital communication for example brief descriptions and examples of
1) source encoding and channel encoding
2) bit rate and bandwidth
3) modulation FM, AM and PCM, PAM, etc
4) PCM, PAM (...)
Digital communication :: 11-11-2012 14:57 :: electronicengr :: Replies: 1 :: Views: 559
I have a set of digital modulated signals (ASK, psk, fsk). I have extracted few features from these signals and saved all these feature values in a feature database. Now if i use decision tree approach to classify these signals based on the extracted features then how to determine the threshold values of these features which would (...)
Digital communication :: 10-08-2012 09:05 :: Shruti01 :: Replies: 0 :: Views: 357
Info on important characteristics of different psk and fsk modulation schemes - need examples. Thanks
Digital communication :: 06-14-2012 06:13 :: begi :: Replies: 0 :: Views: 863
what are the advantage of ASK over psk and psk?
Elementary Electronic Questions :: 03-08-2012 16:22 :: firas90 :: Replies: 2 :: Views: 3632
I would like to design a wired communication system between 2 buildings say 150 meters apart.
My idea is to design a transciever which can be used on both ends of the wire channel
Transciever will employ either fsk or psk for data transmission/reception
I would like to know how to estimate minimum signal power required to transmit data
Analog Circuit Design :: 01-28-2012 21:23 :: edinburghtech :: Replies: 3 :: Views: 758
The OP didn't yet ask for the code...
For many applications, a NCO (numerical controlled oscillator) vendor IP will offer all what you want. If you think of modulating an existing carrier, you should consider that both fsk and psk involve a signal manipulation in time domain.
PLD, SPLD, GAL, CPLD, FPGA Design :: 01-13-2012 09:14 :: FvM :: Replies: 3 :: Views: 1237
It seemed to me that there is something wrong in the words "binary noncoherent fsk" in the problem.
If we substitute that by "binary coherent psk", and maximum data rate of 1.2 kbits/s instead of 2.4 kbits/s, it makes sense.
In which context is the problem proposed?
Nevertheless, like Lomaxe, I don't like paragraph (b).
Digital communication :: 01-03-2012 19:39 :: zorro :: Replies: 8 :: Views: 926
What is the difference between PCM and other modulation techniques like psk, fsk etc... I understand how they are done, but my question is where do they fit in communication system. lets say we have binary sequence we can use PCM and transmit it..then why do we need other keying techniques. do we something (...)
Digital communication :: 11-07-2011 15:59 :: varindernew :: Replies: 1 :: Views: 2211
why phase shift keying (psk) is often used for DS-SS whereas frequency shift keying (fsk) is used for FH-SS?:!:
RF, Microwave, Antennas and Optics :: 09-05-2011 02:27 :: naspek :: Replies: 1 :: Views: 1690
I have attached the frequency spectra of fsk and psk.can some one please explain why these figures look different, why is it that the peaks are formed only for fsk modulated signal and not for psk signal.
Digital Signal Processing :: 05-06-2011 19:51 :: jess17 :: Replies: 0 :: Views: 479
hello , how are u all
i need help to find matlab code for
fsk modulation & psk & OOK &PRK
and also bit error curve of all modulation above VS SNR
thanks in advance
Digital communication :: 12-26-2010 16:06 :: eng_M :: Replies: 0 :: Views: 1142
I have been reading on fsk , psk and ASK and have been asked to produce a graph ( attached ) by writing few lines of Matlab code.. :|
Could any one possibly tell me how to get started on this please?
Digital communication :: 11-01-2010 09:17 :: Girly_girl :: Replies: 10 :: Views: 4237
I need your help.
I currently work in the detection of signals with digital modulation, especially psk and fsk signals.
I found the most convenient method for the classification between these two signals is the wavelet transform. I tried to apply it but the problem that the histogram is not what I am looking for.
Can you (...)
Digital communication :: 07-15-2010 19:26 :: Franchiska :: Replies: 1 :: Views: 960
I have a essential need to a general information about the design of receiver and transmitter of a satellite communication system involving general block diagram of components and brief explanation about each of them.Modulation types are psk and fsk.
Anybody can help me?
Please help me?
Digital Signal Processing :: 07-10-2010 19:12 :: vahid28 :: Replies: 0 :: Views: 1990
As you are mentioning class E also, I suppose you dealing with RF power amplifiers.
Class E amplifiers can only be used for modulation schemes that have constant envelope (FM, constant envelope psk/fsk, etc).
Filtering out the harmonics is good to remove the harmonics, but does not remove unwanted sidebands due to (...)
RF, Microwave, Antennas and Optics :: 05-02-2010 14:34 :: WimRFP :: Replies: 4 :: Views: 1086
hi, friends I am new in this forum, but I have my project of simulating an interctive ASK,psk and fsk comunication system using simulink.
but i have do not understand how I can iteract these three communication systems such that user can interactively choose one of the sheme and see the waveforms at each (...)
Digital communication :: 03-28-2010 08:34 :: mmallaba :: Replies: 0 :: Views: 1467
I have been investigating on the applicability of power line communications techniques. I want to simulate the plc system in MATLAB (m file).The simulation includes fsk and psk and OFDM modulation and demodulation , error control coding , powerline channel and the noise over (...)
Microcontrollers :: 05-01-2009 08:37 :: Mai Ahmed Samy :: Replies: 0 :: Views: 1190
I believe it is simply due to battery power available. psk uses coherent detection, and as such has a 3 dB detection advantage. So they can use a transmit amplifier in the satellite that is half as big as if they tried to downlink with fsk.
Added after 4 hours 2 minutes:
Also, you can have much better err
RF, Microwave, Antennas and Optics :: 04-18-2009 15:03 :: biff44 :: Replies: 2 :: Views: 1154
i need matlab code for modulation and detection of time varying channel..
i need the code for interleaver,modulation using coherent bpsk,non coherent fsk,
Digital communication :: 02-25-2009 06:13 :: sivaaec07 :: Replies: 3 :: Views: 2272
first Same MEAN POWER (1/2 of ones's and 1/2 of zeros'), Amplitude equal for all waveforms (ASK, fsk, psk, etc)
then compare things:
ASK detector have one branch. Noise in only one branch. Mean Power
fsk detector have two branches. Noise in two branches. 2xMean Power
psk detector only one branch. (...)
RF, Microwave, Antennas and Optics :: 10-19-2008 18:42 :: teteamigo :: Replies: 2 :: Views: 4007
Please give Ur request in some more detail, like the receiver is analogue or digital. In either form the receiver could take several forms such as AM FM SSB VSB for analogue and fsk, psk and so on for digital. also the receiver could be superhetrodyne
Elementary Electronic Questions :: 07-29-2008 18:14 :: arman_arian2005 :: Replies: 3 :: Views: 1117
1. Why FM is better than PM for analog communication?
Which is better depends on the characteristics of the signal to be transmitted.
For FM transmission of speech, it is usual to use preemphasis before FM modulation and deemphasis after FM demodulation. This is equivalent to use PM (if the cutoff frequency
Digital communication :: 06-20-2007 12:25 :: zorro :: Replies: 6 :: Views: 6559
>> and why psk is a linear while fsk is a nonlinear modulation technique?
I am not so sure if psk is linear. Your comments ppl.
Digital communication :: 06-18-2007 15:33 :: zeeshanzia84 :: Replies: 4 :: Views: 25306
Bfsk is easy to implement but I don't recall any large communication system that uses it, although Mfsk is somehow used if you cosidered a frequency hopping as an Mfsk modulation scheme, yet still it consumes more power than any other scheme like OFDM or CDMA and also it consumes more bandwidth than (...)
Digital communication :: 04-08-2007 09:31 :: bibo1978 :: Replies: 17 :: Views: 15364
I am doing a DSP project on implementing modulation schemes such as psk, fsk, GMSK, Qpsk. If anyone has already worked on those and have their MATLAB or simulink code, i would be very grateful if you can mail me. I have implemented Qpsk but would appreciate if anyone could provide some or all of those. (...)
Digital Signal Processing :: 01-11-2007 16:20 :: abdullahkhan5 :: Replies: 0 :: Views: 3414
i have to a project to tranfer data between PCs using sound card. Require data is modulate fsk or psk or HDB3 ... to packet. This is my exercise for data communication and transmission.
Please help me ? using PIC or PC, soft by delphi
Have you some idea?
PC Programming and Interfacing :: 11-01-2006 14:42 :: hivongxanh_dt7 :: Replies: 1 :: Views: 1394
Binary ASK (on/off Shift keying) is the least one that occupy spectrum because you transmitt carrier in case '1' and nothing is transmitted in case '0'
in Bfsk you tranmitt carrier f1 in case '1' and carrier f2 in case '0' , so spectrum is larger as you have now 2 freq. components , Same case for Bpsk except for (...)
Digital communication :: 05-27-2006 08:02 :: Abu Ammora :: Replies: 1 :: Views: 2810
otherwise anyother simulation tool is available for this???
use simulink to get sine signal and you can use system generator implement psk,fsk on xilinx FPGA.
PLD, SPLD, GAL, CPLD, FPGA Design :: 01-29-2006 04:05 :: Matrix_YL :: Replies: 6 :: Views: 2489
is there any component in orcad make modulation like ( fsk , psk , ASK .......)
Analog Circuit Design :: 03-07-2006 20:36 :: agana56 :: Replies: 1 :: Views: 1430
i want the differences between ASK and AM ,fsk and FM ,psk and PM'' be precise i want to know Analog modulation versus Digital modulation(ASK vs AM,fsk vs FM, psk vs PM). which one is terms of bandwidth,SNR or
P(e), modulating and (...)
Elementary Electronic Questions :: 02-15-2006 10:48 :: electronics_kumar :: Replies: 8 :: Views: 29684
i using vhdl simulation software MODELSIM SE, i planned to write a code for fsk,psk modulation and demodulation, can anyone help me on this, and also i need use work.sine_package.all library to be included in that, where i can find that??
Elementary Electronic Questions :: 01-28-2006 10:28 :: brahma :: Replies: 0 :: Views: 1659
Weis Guy, psk and Qpsk are much more complicated modulation than ASK and fsk, so it is diffucult to find a IC doing it, maybe easily you can find a complete transceiver or transmitter...You can search on globalspec
Digital communication :: 12-22-2005 16:26 :: mwmmboy :: Replies: 5 :: Views: 5657
make the noise-less ASK, fsk and psk signal
Add gaussian noise to that
Plot a scatter diagram, in MATLAB...
It's very easy
Digital Signal Processing :: 12-20-2005 13:06 :: alok_ky :: Replies: 3 :: Views: 4405
Make sure you use the proper conditions for each situation. For peak power limited systems the ranking above is correct. For average power limited systems ASK and fsk have the same error rate for the same transmitter average power.
Elementary Electronic Questions :: 11-12-2005 20:14 :: flatulent :: Replies: 7 :: Views: 7352
In general, the more bits per symbol, the more critical distortion and noise in the path between the modems become. fsk is more tolerant of group delay variations across the frequency range used. psk and Qpsk is more tolerant of noise.
If you are using your own set of wires between the modems you can (...)
Digital Signal Processing :: 06-13-2005 15:42 :: flatulent :: Replies: 3 :: Views: 1077
You will have to put a psk detector at the end of the IF chain in place of the AM detector. It might be easier to use fsk and have a PLL as the fsk detector. If you do need the psk, look up "costas loop' on the web or in a communication theory textbook for circuits.
You could even use on-off keying (...)
Analog Integrated Circuit (IC) Design, Layout and Fabrication :: 02-02-2005 05:53 :: flatulent :: Replies: 3 :: Views: 3806
The psk will have 3 dB better performance at the cost of more complex receivers. The reason for the 3 dB is that fsk is orthogonal and psk is antipodal. This may not mean much to you but the distance between the two signal points is 1.414 times larger for psk.
RF, Microwave, Antennas and Optics :: 11-30-2004 19:49 :: flatulent :: Replies: 3 :: Views: 1651
I am newbie in RF field, I just wanna to know how much fast the data rate ASK and fsk and psk modulation can go? another question is why there are no RF module in the industry using psk modulation in their chipset at 315MHz and 433 Mhz?? Thanks!!
RF, Microwave, Antennas and Optics :: 04-15-2003 01:18 :: skynet :: Replies: 2 :: Views: 3127