Search Engine

Import And Hfss And Dxf

Add Question

29 Threads found on Import And Hfss And Dxf
How to import autocad design to hfss ? I have export an autocad file in .sat format and imported in hfss. but in hfss it shows a different layout. please help
hfss supports the import of a variety of 3D files. If you have a 2D file (*.dxf possibly?) you could import that and use it as the basis for drawing a 3D model for simulation.
I made a simple patch antenna in CST. Now I want to compare its results (S11) by designing it in ADS and hfss. I'm able to import dxf files from CST into hfss and ADS. I successfully simulated the design in hfss but was wondering if I can (...)
Hi, I am working in Rotman lens antenna. i want to know how can i draw it in hfss and i hear that it is very difficult to do that . i have been started to draw it but it was very Creepy. So , i have read that it is simple to draw it by AutoCad and then import the dxf file (...)
Just had the same problem when importing to LPKF CAM software. The correct answer - all the planar objects must be collected exactly at Z=0. Then dxf export/import works fine.
look at the available filetypes available for export from auocad, the look at the types available for import in hfss v. 11 and see if there's any that match. for hfss v.15: sab, sat, sm2, sm3, anstgeom, xls, dxf, dwg, exp, model, CatPart, CatProduct, gds, iges, igs, nas, x_t, x_b, prt, (...)
Maybe if you have exported your model to dxf in CST and then importe to Altium, it may not work because dxf (in CST 5.0 atleast) is 2D and all layers may not have been exported precisely. What I would suggest is to export the file in *.step or *.sat. Then may be you will (...)
The AutoCAD data exchange format for 2D layout is dxf. dxf can be imported into hfss and other EM simulators.
Before going to the dxf import dialog, go to Options > Layer in the layout editor menu. This will bring up the layer editor. Go to the Advanced page and define the names of the dxf layers in your file. Finally, save the settings into a file, with the default filename y
Hi, These files are the full human brain model in different versions of AutoCAD (2000 to 2010) in .dxf and .DWG format(acrually I export them from 3ds max), I'm trying to import them into hfss and run simulation on them. I searched a lot to find a human brain model in (...)
Hi Everyone, I am not able to import dxf files into Ansoft Designer 4 or to hfss 11/12. I am getting the following error when I tried to import, using Layout->import File " viewport entity with no extended data" Any suggestions regarding this error? Thanks, sv
Hi, I am working on simulation of human brain, so I need to import a file to hfss, the file is a .mat file (MATLAB). is there any way to do this??? thanks,
I think one should go for AutoCAD in case of such curves.. First drwa the structue in that and than import the .dxf file in hfss Besties Kecbackbencher
I would like to use Matlab to draw a geometry and then save it in dwg or dxf format to import into hfss. Does anyone have a code to generate dxf or dwg from a generic geometry like a square? Thanks in advance for your help.
hfss can export a dxf file. Once you have that, you need a CAM editor, or other PCB software that can import the dxf and export the Gerber files. Without knowing what sofware you have at your disposal, it's difficult to give detailed directions. If you can get the dxf (...)
Ok thank you for your reply, My problem with the import of file, I have some design with hfss I would obtain the layout using GerbTool so I import the file from hfss (*.dxf) and I try to export it under GerbTool but I don?t obtain the desired layout (it give me only the (...)
Send your ADS design to the Momentum Layout and save it as a dxf file(or what ever file format you can easily import to hfss). Now start hfss and look for that Momentum file. It should be straight forward. In Momentum go: "File"-->"Export" (...)
First you need to import the dxf to layout and then export to Gerber. Its try and iterative process in setting the various check boxes
Hi, I've made some 3D designs in hfss and now want to export them for PCB fabrication. What I had done in the past was to use hfss -> SAT export -> AutoCad import of SAT -> dxf export -> ADS/Momentum dxf import -> Gerber export However, this doesn't (...)
I trying to find the way by which i can cut the head cress section. I want to import then into MATLAB.
Any CAM Editor can import a dxf file and export a Gerber file - Camtastic, CAM350, Gerbtool, etc. If you don't have access to such an editor, you can PM me your dxf file or post it here. I'd be happy to generate a Gerber for you.
From my experience with dxf import, the hfss automatically did "sweep->along vector" and made from a 2D dxf surface into 3D object. Fortunatelly, one can manually delete sweep along vector and 2D surface is again obtained...
Thank you I draw a box on AutoCAD and save with *.dxf extension. In the hfss I import this file, but hfss not accepted. plese help me more.
You can use export your hfss model into a suitble extension that you can import in your desired PCB software. Regards
try to export step and import it to hfss you have to buy the license for it. step or sat better then iges. pl
I've tried the .dwg and it imports correctly into hfss. But I still haven't done myself to export/import different layers
hfss has 3D-model import from mechanical programmes, only. For example -SolidWorks.
hello, I am an ocasional autocad user and, up to my knowledge, the dxf format is only used for 2D drawing, not 3D. If you want to import to autocad a 3D drawing, i think you must use ACIS (*.sat) format or 3d studio. Check hfss to export one of those regards
check yours yahoo mail , i've sent hfss manual to you. if you used dxf import of cource you have 2d model or set of FACEs, so you need add volume to model and transform it to the OBJECTs by "SWEEP ALONG VECTOR" function, applied to FACE. only after that you can (...)