Search Engine

Manual Hfss

Add Question

79 Threads found on Manual Hfss
Hi, I am using hfss-13 and could not find some detailed help how to used this software. I have got manual for hfss-10 but there are some differences which are not addressed in that (being manual of old version). Can anyone guide me to manual/help of hfss-13 which can prove fruitful for (...)
I have confused to assign wave port in side the radiation box. I have read hfss manual as sown in attached picture. but i haven't understood this concept. In the below mentioned link discussion also am getting same doubt to assign wave port inside the radiation box.
Looking at the example given by hfss manual, I can see a ring around the inductor acting as a gnd reference for the port, but it is not connected to the actual gnd underneath(below the silicon), so how does it work? Should the ring be connected to the gnd below in the actual
I am new to scripting with hfss, and VB coding. Is it possible to define a vector in the VB script? It does not appear to discuss this in the online manual 'Introduction to Scripting in hfss' An example of what I would like to do... vect1 = [
can master boundary be applied to one face of air box and slave on the opposite phase in hfss or we need separate master air box and slave air box?????????????????
Considering you are fresh in this field, I recommend u choose the 4th topic -- Koch fractal dipole. Other topics deal with more advanced techniques, such as array or circular polarization. There are step-by-step examples on dipole simulation in the manual accompanying the hfss software.
Is anyone using hfss 13 If yes, i want hfss 13 vbs script manual i cannot find it in network.
hi, can any body give me hfss manual or any figure of double slot antenna drawn in hfss,i cant understand how to draw it on hfss.plz help me
hi can anybody send send me hfss manual of spiral antenna and double slot antenna?please i want to read it so that i can use hfss.plz if anybody have it send me
I think there's an example in the manual of analyzing a cavity with the Eigenmode solver. It might be worth looking at that. Dave Thank you! Do you know where can I get the example?
In the manual for hfss 14, which Ansys have not updated since version 11, there is an example of a conical horn antenna. (Pages 5.2-1 to 5.2-18). I've tried to do this example, but have hit a couple of problems. One of which is that the results I get for the radiation plot are not the same as in the example. I'm not sure if this is just minor diff
Can you plz give me link to download hfss and any manual for its use.. Like most other EM simulators, hfss is a payed product. You can contact sales for an evaluation version: C
I want to perform optical simulation using hfss. In this simulation i want to find out how much light/incident wave is absorbed by a SWCNT(single walled carbon nano tube) or any general solar cell structure. So is there a hfss manual or tutorial for optical simulation seperately. Please reply.
Hello, can anybody provide me the user guide or manual of any version of hfss. I have lost my manual due to formattig of my computer. i will be highly thankful if anbody provide me this Regards vishal
I'm using hfss 14, and are trying to do example 5.5 (Endfire Waveguide Array) in the examples sections. But I have various issues, at least some of which I suspect are due to the fact the manual for hfss has not been updated since version 11.1 of hfss - the manual is now over 3 years old (dated 20th Feb (...)
Dear, If you go through the attached hfss tutorial, it will become easy for you to work and design the required antenna. It will also help you to completely understand the simulation software.I recommend you to first read the manual and then try. IF you stuck somewhere you can ask. Regards, Arxlan
There seem to be several examples in the hfss user manual and around the web on using hfss with the default FEM solver based on the PDE form of Maxwell's Equations. But I can't seem to find much on the use of the optional hfss-IE, which is based on the Method of Moments and so more suited for electrically large problems. (...)
Hello Everyone I have chosen this project :DESIGN OF A HIGH-GAIN CAVITY-BACKED SLOT ANTENNA WITH MUSHROOM CELLS AND BENT GROUND WALLS . . . I donot know hfss software i read the user guide manual v10 and designned slot patch antenna Can u please tell me how to design for our required parameters and how to design mushroom cells i need to see the m
I've been trying to do some of the hfss tutorials, but like many others seem to struggle with hfss ports. I think part of the problem might be the fact the code has changed, but the documentation has not. Unless I'm mistaken, the lastest manual is for version 11.1 which is a PDF dated 20th Fed 2009. This is based on hfss (...)
Hello Abrar You can begin with the hfss manual and then learning while doing is the best to learn any software. Regards Sajid Mohammed.
Does anybody have any experience importing hfss antenna patterns into Satellite Toolkit, or any other external antenna files for that matter? I've followed the STK manual exactly and tried a few different iterations, however the best I can get is a pattern that resembles mine however it is cut in half.
I've made the UHF probe example in hfss version 13, manual. But when I simulate it, I find the best return loss occurs at 610 MHz not 560 MHz as the example shows in the user guide. Has anyone else hit this problem? Dave
Yes. As hfss manual said, better meshing is implemented on the inner virtual airbox. Therefore it should give more accurate simulation results of the far-field properties. The inner box is not needed. It was called a virtual airbox and was used in older versions on hfss to create an inner surface to do field integrations
First of all, u need to know that IE3D cannot simulate an exact coaxial feeding like what we do in hfss. The practical way to emulate an coaxial excitation is to use the vertical localized port. There are plenty of examples of such feeding in IE3D manual.
Hi everyone. I am new to hfss,when i used to design the patch antenna of the manual of hfss,it gives correct results,but when i design my own patch antenna or any patch antenna of any research paper ,it does not give correct results,it resonates at multiple frequency and its S11 graph is also not i don't know what and where is (...)
There's plenty of info if you google it. The hfss manual even has an example of microstrip transmission lines. You will just need to adapt it to your coplanar strip line. Try: Port Tutorial CPW
I thing you can find an example in its manual
I remember that hfss attached a manual that describe how to plot pattern in step by step.
Hello, I m having problems trying to simulate a probe feed patch antenna as explained by the hfss manual. I have tried pretty much eveything as directed by the manual. Please help me out. Regards
Hi, I want to define a virtual object around the antenna and do a manual mesh on the virtual object in order to get more accurate results (in hfss). Can someone tell me how to create a virtual object, what boundary conditions I should use on the virtual object, and what kind of manual seeding should be done on the virtual object ? (...)
hi I try to simulate a microstrip bandpass filter but I face this this is my hfss file and manual of this project: I'll be glad if someone help me. thanks.
Hi Can you post this "manual"? or something so we can compare the results and structure with your hfss file. Thanks
Hi all, I am starting to work with hfss to design inductors. From the manual, the design steps seem to be complicated for me. I don't know if hfss provides some specific tools or package to simplify drawing and analyzing inductors ?? Best regards, DYL:D
yeah u can..refer manual.....assign filed sources in it
please can you provide me hfss 9.2 manual
Make sure you use the proper impedance definition for microstrip i.e. Zp. Please check it in the manual. when you use ABCD matrix, make sure you used the proper length.
fix phi at 0 deg and then 90 deg and plot theta from 0 to 360 (or the range of interest). Read the manual if you need more details.
Hello If possible can anyone please send me a link or upload a manual that teaches how to control (operate) hfss ver 11 with MATLAB especially in pre-processing (geometry set-up, material assignment and running simulation)? Thanks
IE3D have a very detailed manual .hfss have a many workshops,in their site.
im lookin for a manual of antenna arrays Added after 2 minutes: plz sms me the link of rapidshare
Hi everyone, I am trying to design a spiral inductor on hfss v11. the manual i have is v10. I have probs in assigning lump ports and also excitation. Does anyone has the v11 manual (adv notes) for this or could someone pls guide me. I dont have points yet. Pls send via email to lina_7572(at) Thanks
hi, for IE3D u should download manual (evaluation version) from zeland website. For hfss lot of tutorials are available in this site.
im new in using to learnt hfss because the manual provide are not enough.Anybody can help email is
Has any one had a problem when using mesh settings (either manual or lowering the value of the lambda refinement of initial mesh) in computing far-fields. We have noticed that sometimes when we set these mesh properties too high, the far field calculation becomes garbage even though the S-parameters are correct. Any thoughts are appreciated.
this manual contains many examples and
@pollop hfss is not that easy, so i recommend you to study the manual carefully and practice some examples in it, radiation boundary is used when you are simulating anteenas or radiating objects. in real life we have a free space around us to infinity similarly radiation boundary in hfss represents the boundary which absorb
How can I draw a backdrilled via in the Via Wizard GUI.exe? The User manual told us that Backdrilling can be investigated by changing the "Via#_backdrill" variable in hfss. But I can not find the "Via#_backdrill".
Hi, everyone. I have a question about the differential pair definition in hfss Driven Terminal simulation. I am wondering is the Differential Terminal Port Impedance equal to the odd impedance and the common terminal port impedance equal to the even mode impedance in the couple line. Actually, from the manual of the hfss chap. 8: (...)
record step by step during you manual design and read help of hfss script. and you can also find some example in this forum then after 1 week you will be an expert
Dear All, I'm Looking for the latest version of the hfss , which is V. 10 , because the one that I'm using right now (V.9) is unable to solve the problem that I'm trying to simulate ( an 8-slot magnetron cavity microwave power amplifier) and the company declared that clearly in the V.10 manual at page 139. so please if any body knows a way