Search Engine

Model Proteus

Add Question

353 Threads found on Model Proteus
Hello! I have a question regarding ISIS proteus. I want to modify the existing LM35 so that the output is 250mV + 7.0mV/degree instead of a flat 10mV/degree. I was thinking of modifying the SPICE model? Design: LM35.pdsprj Doc. no.: Revision: Author: Created: 27/11/2012 Modified: 27/11/2012 *PROP
Most commonly, electrolytic capacitors are modeled as ideal capacitors, means just ignore that they are polarized. In detail, the question is which properties of an electrolytic capacitor you want to model additionally? If it's ESR, add a series resistor. Other parameters (leakage current, non-linear capacitance, behavior with polarity reversal
when i copy the hex code link created by arduino IDE and put it into the arduino model in proteus it works but compiled code within proteus doesn't, why? does anybody have any idea? Let's start from scratch, taking one of the various tutorials available on the web, so that you can pinpoint exactly at which stage you
Playing with the proteus you can connect BLDC wires directly to mcu's pins. model is digital, nothing can blow up. Well, because you are still alive, I think, you not going outside proteus anyway. So, just continue playing.
You have to put library files to libray files in labcenter/proteus/library that has files with extension "lib" and other files models you have to it to model files labcenter/proteus/models.
hi, does anybody know of 14 bit ADC with spice model for simulation purpose? looking for similar in performance to AD9245. thanks!!
i want to create simulation model of a component which has spice model If you are talking about a standard device, this article seems to answer exactly your question: Important to mention that prior to know how to handle the suffs in proteus,
I guess the antique TTL IC does not have an accurate model.
Hello, I have to create a simulation model in proteus including a PIC crypto controller (one of these) in proteus. As I understand, such controllers are not provided by the standard proteus library, so I'm going to create the custom o
You have to use the "small memory model" to create the EXE (compatible with the proteus 8086 device). Look at this site (for example):
According to datasheet specifications, a 5V supplied cd40xx can reliably drive one LS input. I won't expect to get meaningful fan-out/fan-in simulation from proteus. Like other SPICE based simulators, it uses a mixed-signal mode and doesn't fully model the analog properties of digital gates. There's also a large gap between the worst c
It appears that it has a problem with the output node of the amplifier when the gain setting resistor is connected. When the resistor is removed it simulates. So there may be a problem with the model itself.
I think proteus does not have an accurate model for the LM324, or all its opamps must be powered.
You get out what you put in. What's the expectable voltage variation after balancing according to the cell model?
I am having MATLAB SIMULNK model. I want to interface it with proteus for reading data using PIC and display in LCD.Whether its possible to interface like that???
Maybe your teacher does not want to teach anything but instead wants you to find a model for the old TDA7052 amplifier yourself, if a model was ever made for it. Maybe your teacher wants you to learn how to take information from the datasheet and make the model yourself, instead of teaching you how to do it. Maybe your teacher does not know (...)
There is not a model for the PIC18F97J60 for proteus nor is there ever likely to be as it would be very expensive to produce. I hope that in the future that Labcenter will produce models for some of the newer processors, but I am not holding my breath. The best available PIC18F processor in proteus is the PIC18LF47J53 this (...)
Hi, I want to do a project based on Zigbee technology will be useful for maintaining the voltage and current of an induction motor under prescribed values.For that i want to use pic controller and zigbee module to monitor and control it. Can anyone help me with the proteus model for the above mentioned project. THANK YOU
1) can i import microprocessors IDE, BSDL model or IBIS model to proteus ISIS to simulate them? will it work? 2) is there any supplier giving proteus spice model to direct import to proteus library? if yes, please state the supplier name, model types and how to import (...)
Hi there, I?m looking for proteus ISIS simulation model for i.MX233 processor. Based on website, only IBIS model available. I know that IBIS model cannot be simulated in proteus ISIS. The objective is to simulate the processor model in proteus ISIS before starting (...)
The coupler will be represented by coupled inductors, possibly with series resistors modeling the losses. You need to determine the coupler parameters for your geometry.
Hello, I am designing a voice compression circuit and i use Tc7109 12-bit resolution adc in my circuit, the problem is there is no simulation model for this adc in multisim, orcad, or even proteus. How can I simulate this adc chip? Thanks for your concern.
Hi Pawan kumar Have You asked to Labcenter. Creator of proteus system ?? Visit this link: They have a discussion forum here: Probably you find something good for you. Moreover: why not looking for these displays, first, in your area ??. . I recommend you firs
Hi, I would like to simulate SGx524 IC using LTSpice, proteus or Multisim. I've searched and tried everything I could find about this but none of them worked. Does anyone have a SPICE model or library that I could use to simulate any of this ICs? Thanks!
you will only get PCB foot print and model in proteus, you wont get simulation model. you want?
119728 I simulation cable model circuit for circuit Vsource=30kV AC when C27 have 15kV S1 is short C27 to 0V and open circuit any loop but!!! I don't have plot graph by current C28(2) How any thing sim this circuit? or 0ther program support this circuit ? thank you any one :-?
Hello,everybody; I got a proteus component model of microphone at this forum that is;ISO-8859-1__MIC.rar(I attached it here) ,but I don't know how to add it to my proteus and use it. Would you please tell me how and in which folder should I place the; ISO-8859-1__MIC.rar / MIC.DSN ,in my proteus software,so (...)
Did you see this link ? You have to use COMPIM model to interface RFID with proteus. Connect RFID Reader to PC using TTL2USB adapter.
You can simply use proteus COMPIM and interface RFID, GSM, GOPS etc... to your PC and communicate with proteus. Do not use MAX232 with COMPIM model. Also you should have a hardware COM port available in your PC and its COM port number should be between COM1 and COM4 then you can install eterlogic Virtual Serial Ports Emulator and create a (...)
proteus do not have any model for gsm so you have to simulate the real serial port of your PC in proteus. while your real gsm is connected to your PC.
Can anyone please give me the model for this sorry if the thread isnt for here. I need the model,also any help on the ethernet protocols will be useful.I know the schmeatic is conected to a CJ 10/100 base transformator and then to a router,switch or router and PC.Any help would be useful,Im using CCS 5 plus proteus. There is (...)
Soon you will understand why searching for this model is a time waste.
hello friends i am facing some problems while interafcing PIC18F4550 witl GLCD. i am using Mikroc 6.00 compiler, and using built in libraries present in MIKROC. i am attaching my code here, and also a proteus model. if i comment the line No. 173 and 174 then LCD is displaying. but when i uncomment thease lines then nothing is showing on LCD.
Make sure you are not using a model that can't be used for simulations. Try another similar op-amp. Sometimes a model may have problems or errors. I found that on several occasions.
For this I need to interface adc0809 for temperature sensor LM35 with 89v51and want to display temperature on LCD. But after creating HEX code in KEIL, I m facing problem during simulation in Software proteus. Issues: 1. No model specified for adc0809. 2. Simulation failed due to partition analysis error" I m not getting the reason wheth
A PV panel puts out high A at low V, or low A at high V. It depends on how much you load it. Example: 0.1 A @ 20V (2W, light load) 4 A @ 0.5 V (2W, heavy load) Maximum power transfer is at a middle point. Example, 2A @ 12V (24W, medium load). This is difficult behavior to model in a component. I have not seen a simple circuit which is able to mi
Are you simulating AC ? If yes then attach a ground to VSINE model.
The only difference between a current and voltage transformer is the windings ratio. All transformers can be well represented with the standard transformer models. Get the data of your preferred CT from datasheet and translate it to model parameters (primary and secondary inductance, coupling factor).
Hi.. I am trying to interface DS1307 with PIC. I am trying to do that in proteus first and then planning to implement in hardware. In my proteus model, RTC is working fine for 130 seconds exactly. After that, RTC is resetting to the time I set. Can anyone here pls throw some light on this weird problem.? I will be grateful if you can (...)
If proteus doesn't have the model for PIC16F72 then use the Compiler's debugger to test.
Look at the model parameters, there's nothing specific for primary or secondary winding except windings ratio.
I don't believe that proteus provides models of ultrasonic transducers with time-of-flight. You can possibly make your own behavioral model based on RLC resonant circuits and delay lines.
Hello, I want to build an android-based embedded system. Is there any simulation tool with the ability of describing and simulating the design before hardware prototyping? (something that proteus does for simpler parts and ICs). I need the tool to model one or more SoCs (Tegra, Exynos, Snaopargon,...) to conduct a design space exploration to find
Have you disabled ADC and other multiplexed function on RC0 and other pins used for MMC SD Card communication ? Post your complete mikroC project files. Zip and post your proteus file. Have you created an .mmc file to load into MMC model of proteus using winImage 8.9 ?
Hello to everyone, I designed spice model of HCPL3140 in proteus. It's not working properly. It gives unexpected output of 0.6V instead of high output. --------------------- model properties: {PRIMITIVE=ANALOG,SUBCKT} {SPICEFILE=AvagoHCPL3140_MOD.TXT} {SPICEmodel=HCPL3140} {SPICEPINS=A,K,VEE,OP,VCC} (...)
Compile Arduino code in Arduino Compiler which is free. It will create a .hex file in Temp folder. Use this .hex file in proteus with Arduino board model.
hello everyone, I need a DHT11 or DHT22 model for proteus 7
If I define a custom character that uses the lowest (8th) pixel row also, this row is never displayed, although the HD44780 datasheet says this: The 8th line is the cursor position and its display is formed by a logical OR with the cursor. Maintain the 8th line data, corresponding to the cursor display position, at 0 as the curs
Hi, Can any one help to develop or provide me the proteus model for Lnk 306P IC to simulate my circuit