Search Engine

59 Threads found on Model Undefined
Hi, I am using Orcad 16.6 and trying to implement a memristor model. but after writing the code and attach the code into the symbol when i run the shows ERROR(ORPSIM-15108): Subcircuit MEMRISTOR used by X_MEMRISTOR is undefined I have tried many times but could not able to solve the issue. Any solution will be appreciable. Thanks in
Hi, I am trying to design a bias circuit for an amplifier and I just started using ADS. After building circuit when I try to simulate it gives me following error MOSFET1 is an instance of an unidentified model MOSFETM1 anyone faced this problem?
You need to also place a model symbol in the schematic, like BJT_model. This is where you would define all the necessary model parameters for the device for it to simulate appropriately.
Missing library include in tool configuration (e.g. onsemi_bjt.lib or wherever the said transistor model can be found). Learn about the Pspice library concept!
Hi, I am using Orcad 16.6-p005(v16-6-112D) , on Windows 10 and any model like Max907 from Pspice/MAX.OLB or IRF152 from powermos.olb , I get the same corresponding sub circuit error . As an example here I add Error(Orpsim-15108): Subcircuit Max907/Mxm used by X_U1a is undefined. Also in the file Pspice.ini instead of C:\cadence\SPB_
There could be 2 possible reasons - - You might be using wrong symbol libraries which are not meant for simulation. Always choose libraries from - tools/capture/library/pspice - Your model libraries may not be configured properly. You are using very old version of Pspice, I am not really sure about the library setup on that version. Recent ve
I've searched the web for how to use the BSIM4 model to build sub 100nm MOSFETs in ADS but completely failed. I used ADS to translate a working BSIM4 model defined with Pspice codes but it fails to translate, actually it gives a warning saying an instance of an undefined model.
Do you surely include model file ?
Hi all here i m giving link for spice model for transistor BFG403. Actually here too many files and i seen youtube video to model spice component and tried same but in simulation it is showing {ERROR -- model BFG403W used by Q_Q1 is undefined ERROR -- model BFG403W used by Q_Q2 is (...)
hi all i am trying to run a simple circuit and i am getting an error "undefined instance" and i found in setup-- model libraries that there are no libraries included. Could anyone pls tell me wer i can find these libraries and how to add them up. Thank you Just go to the instances and press Q you will get the in
The model/subckt definition is not found in your library path settings. Check to include proper model library.
Hi , Just 1 component , a 3 Terminal operational amplifier. We have been tasked to task to use any model of a 3 Terminal Operational Amplifier to simulate the slew rate response on the Multisim 13.0 software. Appreciate your advise.
Most probably you don't have model library (having TL082 model) configured. You can attach pspice output file to have closer look.
I would dare to say that is missing the model 'LQG18HN' for component L1.
I would expect the register names to be already defined. You can try to compile your code, if any name if undefined you will get an error and then you can fix it. You can also check the content of the header that codevision attaches in the project (the specific mcu model defines).
hi all, I have this below error while simulating my design in ADS during usage of 130nm library files. Simulation / Synthesis Messages Error detected by hpeesofsim during netlist flattening. `M1' is an instance of an undefined model `pmos_rf'. Status / Summary hpeesofsim (*) 350.500 Feb 19 2009 (built: 02/19/09 22:31:44) Copyri
I have got two problems using pspice: 1- when using transformer i encounter this error :ERROR(ORPSIM-15141): Less than 2 connections at node N02710. what is the matter?please? 2- using D1n4001/Diode i encounter this error: model D1N4001 used by D_D1 is undefined how can i solve the problem. thanks
hi, I am a new user of ADS and i tried to simulate simple circuit, i have a diode in it and i get the error "Diode1 is an instance of an undefined model1 "DIODEM1" Also how can i put a vendor manufactured diode? Any help is appreciated thanks, ramesh
You need to show your netlist. From what you have said it just sounds like a misnamed model in the device. Keith
hello I have a question about QRC and post simulation. Before performing post simulation I run QRC to get the av_extracted view of my circuit. When i try to perform the post simulation, I get the error: 75854 The netlist : 75855 All model files are added into the model library. Actually cm
Hi All, I am new to OrCad 16.5. I am trying to simulate a design and I get two errors. 1) Error ORPSIM - 15113 model D04Az11 Used by D_D1 is undefined. This refers to a diode I have placed in the circuit, but was copied from a working example given in OrCad as a basis of the project. 2) Warning ORNET -1119 No PSpice template for D2 ignoring.
Guys, I just finished the schematic diagram for a test circuit for inverter. Its name is inverter_tb. Yet, when I tried to do the simulation, it does not give me waveforms excluding ERRORS!!!! Below is the statement: "ERROR (SFE-23): raw/inverter_tb 41: m1 is an instance of an undefined model nch Any body could figure this out? How d
When I try to run this schematic it gives me the error that BJT1 is an instance of an undefined model BJTM1. And it gives error for every BJT that is in the circuit. How to solve this issue? Either include a model library containing BJTM1 or refer to any of the BJT models shipped with ADS.
You have to edit the instance model property, and you have to make a model with the same name be read in somewhere in the include-chain (setup>model libraries).
I've included a model file in ADS but unable to perform the desired simulation because of the following error 'Error detected by hpeesofsim during netlist flattening. `M1' is an instance of an undefined model `TSMC_CM018RF_BB_model_nch'. Please help! Thank you.
use mos device in analogLib ,cadence will presentation "input.scs M0 is an instance of an undefined model nmos4",but res,cap etc. normal, How to solve this problem?
hi it is the first time i use ads .i have installed it but when i put for example mos in schematic it give error:an instance of undefined model...i dont know why?i havent defined any lib,....plz guide me:cry:
hi dears i have installed ads .its the first time i work with it.when i select for example a mosfet and then i simulate my circuit it gives error:an instance of undefined model.i dont know what should i do .how can i define models? plz
hello I just installed the kit in TSMC 0.18 micron ads and when I run the simulation: there is the following error message that appears: Error detected by hpeesofsim during netlist parsing. Illegal subcircuit name: `rn' is reserved for noise resistance. At first it was M! Is an instance of undefined model year 'TM
Hi i am designing the simulink model of MIMO using multipath releigh channe model...but problem is that when i set the value of intial seed in parameters of multipath releigh fadding channel, it generates the matlab error of undefined function or variable... can any one help me??? can anyone tell me how to set these parameters in (...)
it seems to be some king of lcd model error because it says that the source of the error is lcd_u1 and lcd_u2, maybe you are trying to use some unsupported (not modeled ) lcd function. Alex
when i used the nch_25 model in hspice in tsmc65nm technology i found an error **error** undefined parameter or function definition par1fn_mc for fn_dice_svtn. Please e nter a defined name. here's my code HomeWork#2 Proplem#2.a .param gs=1 Vds 2 0 dc 2V Vgs 1 0 dc 'gs' mn 2 1 0 0 nch_25 L=0.7um W=10um .
I am getting the error: M0 is an instance of an undefined model. When I try to netlist using si -batch
Hi, Anyone can help me with a Zener Diode model in HSpice? The voltage should be somewhere between 2.5-3.5 Volt with a maximum 15-20mA current. Thanks
hi everyone, i am using tsmc 0.18 for rf in eldo rf software, the problem is that so many parameters are undefined and they are giving the errors like that 'x' parameters need to be defined. There are so many terms in the model file. So i need to know that how this can be defined.
Hi i had a problem when i use the controlled voltage swith sbreak. The simulation is aborted because: "model Sbreak used by X_S1.S_S1 is undefined" If i try to open pspice model it says "the sbreak model is not found in current libraries." What can i do? Thanks
I get the following error in TetraMAX. BUILD> run build_model TDN16 ------------------------------------------------------------------------------ Begin build model for topcut = TDN16 ... ------------------------------------------------------------------------------ Error: Module ( TDN16 ) referenced undefined module ( mu1udp (...)
Hi everybody, I´m currently working on simulink, try to model a Tx chain, and I tried to upconvert a QPSK+RRC signal, into Ku Band. I use the math mixer for upconverting the signal, but I always get this message, (even without changing the parameters in the block) MATLAB error message: undefined function or method 'rfblksma
I am trying to simulate a circuit in analog artist but I got some errors: Error found by spectre during circuit read-in. ERROR (SFE-23): "input.scs" 18: X1 is an instance of an undefined model f_oplv1c. I don't know where I can find this library to add if the problem is to add the model library
I add a opamp macromodel from the functional library of cadence to my schematic. The model's parameters are setted by default, and the last parameter is 'macro name=f_op1v1c'. The schematic is simulated in Analog environment, but an error is given that X2 is an instance of undefined model of f_op1v1c. Does the error means (...)
Your question is too simple, incomplete. What are you writing about? Any Spice? What is the object of your simulations? Probably you have to define a proper model and its parameters...
: input.scs:M1 is an instance of an undefined model pmos2v. : input.scs:M0 is an instance of an undefined model nmos2v. The model name in netlist should be the model name in cdf of devices. However, the created model name in netlist is the name of devices (...)
when i tried to make post-simulation using specte simulator with the extracted view ,i got some errors in the spectre.out : input.scs: +8 is an instance of an undefined model dnwpw. what does dnwpw mean? how to solve this problem? if you know,please contact with qq:32415684 thank you.
Hi, I am getting the same type of Error : SYSTEM ERROR: VPI LOADFL Failed to load dynamic library /vobs/jaguar/phdacuw/atlas/verif/gen/libccode_sh undefined symbol: _ZTI11MyPktTransT ncelab: *F,SCILDD: Could not load SystemC model library (/vobs/jagu
Hi please check that you added the block "Set model path" to the schematic
dnwpw is the model name, and you have to provide model info for spectre. You can do it in command line argument or as a setting in ADE.
Hi ,,, any one can help to solve this error ( following lines taken from CDS log file) : \o CDF: An error occurred when evaluating callback. \o Callback: model->display => C035a_mosDisplay('model) \o \o Message: *Error* eval: undefined function - C035a_mosDisplay Thanks
I am using rfde. If you set rfde Spectre Compatibility, you can use cadence PDK directly with spectre model files.
hi, I am new to SystemC. We are trying Cadence Incisive Unified simulator to run SystemC programs. but we are getting this error Could not load SystemC model library libncsc_model (./ undefined symbol: _ZN8stimulus4testEv). ncsc_run: *E,TBELABF: ncelab returned non-zero exit status could you (...)
If we get nmos from analogLib and appoint its model from TSMC PDK , the simulation is good. But if we get nmos from TSMC PDK directly and also use PDK model, the simulation is error. The information is listed as the following. And the same file will be simulated well in other people's machine. My computer's OS is RedHat AS4 and IC5141. Why this