Search Engine www.edaboard.com

Hpeesofsim

Add Question

Are you looking for?:
hpeesofsim netlist
29 Threads found on edaboard.com: Hpeesofsim
Simulation / Synthesis Messages Warning detected by hpeesofsim during TRAN analysis `HB1'. COMPONENT `Single_Trisect_lay2_1': Simulator uses frequency lower than frequency range of Momentum model. The S-parameters are extrapolated. Warning detected by hpeesofsim during TRAN analysis `HB1'. COMPONENT `Single_Trisect_lay2_1':
I have a problem with commands NetTrans and hpeesofsim. I must translate a pspice netlist which consists of about 80.0000 controlled voltage-corrent source but nettrans returns the following error message: STOP WORKING and stops the translation. To netlist with 30.000 controlled voltage-corrent source nettrans work properly. how can I do? I hav
Hi, I want to simulate a netlist from ADS command line. I set all the environment variables. If I typed hpeesofsim -o , Error comes like hpeesofsim variable undefined. How to rectify? I am using ADS 2009. Please help me.
hi all, I have this below error while simulating my design in ADS during usage of 130nm library files. Simulation / Synthesis Messages Error detected by hpeesofsim during netlist flattening. `M1' is an instance of an undefined model `pmos_rf'. Status / Summary hpeesofsim (*) 350.500 Feb 19 2009 (built: 02/19/09 22:31:44) Copyri
error detected by hpeesofsim during netlist flattening. while evaluating MOS Device in ADS
error detected by hpeesofsim during HB analysis HB1 This software is not licensed for use of harmonic lite features .. you donot have appropriate license.
I've included a model file in ADS but unable to perform the desired simulation because of the following error 'Error detected by hpeesofsim during netlist flattening. `M1' is an instance of an undefined model `TSMC_CM018RF_BB_MODEL_nch'. Please help! Thank you.
hello I just installed the kit in TSMC 0.18 micron ads and when I run the simulation: there is the following error message that appears: Error detected by hpeesofsim during netlist parsing. Illegal subcircuit name: `rn' is reserved for noise resistance. At first it was M! Is an instance of undefined model year 'TM
'm new in working with ADS. I installed Avago_ABA52563_250509 Desingn Kit. Instalation went without any problems. Component is seen in Component Palette. If I try s-parameters simulation (by application circuit), I get an error: " Error detected by hpeesofsim during netlist parsing. Unable to access library: Avago_ABA52563_250509. "
thanks mkonca I dont know what is the problem it is not working at all in newer versions i tried it in ADS2009 update 1 and it gives following error "error detected by hpeesofsim during netlist flattening While evaluating expression 'SNP1.CMP1.ALL: Invalid S22 Parameter name detected" Can any one else try to simulate the file BR
I want to simulate the input match layout and output match layout at the same time for a LNA, but there is the following error message: Simulation / Synthesis Messages Warning detected by hpeesofsim in topology check during circuit set up. Number of nodes with only one device attached (topology corrected): 1 Number of nodes w
Error detected by hpeesofsim during netlist parsing. ADS-syntax parser error in '', line 6: `syntax error' I want to simulate the slot_coupling 3dB hybrid coupler in ADS. Firstly, the coupler was drawn in layout window, and good results could be obtained, then created the coupler to a component, but afte
hi How can I solve the following error in ads? " Error detected by hpeesofsim during netlist parsing. Unable to locate library "ckt" " plz help me thanks
hi all I would like to discuss step recovery diode(SRD) modelling using SDD.When I defined the equations and then simulated,the error is : error detected by hpeesofsim during netlist flattening.While evaluating expression'SRD1.SDDNP1.I':expression has not been defined. I am puzzled with this error .Please feel free to cont
% hpeesofsim See "Running a Simulation from the Command Line" of the following. Also see You can use "dsdump" command to dump ds data as ascii file.
Hello! Im workin with ADS2008. Its not my first circuit co simulation. Now Ive a layout to simulate at 900Mhz. The same layout simulation worked fine at 434MHz. But at 900MHz I get an errormassage during simulation and it stops: Warning detected by hpeesofsim during SP analysis 'SP1' Component 'X1.top_1': A new model for the layout
i am using ads 2008 Error detected by hpeesofsim during HB analysis `HB1'. This software is not licensed for use with harmonic lite features. You do not have the appropriate licence to use this feature. FlexLM error message: License Error: unable to locate the specified license file AGILEESOFD_LICENSE_FILE = C:\ADS2008\licenses Stat
What means this?i get when i simulate envelope on advanced desugn system hpeesofsim (*) 331.200 May 6 2008 (built: 05/06/08 00:26:15) Copyright Agilent Technologies, 1989-2008. HB HB1 . HB HB1 Pin=(-50->-23) Krylov-HB: 19 fr
Hi When I set up a data file in my Simulation, I get the following error: Error detected by hpeesofsim during netlist flattening. While evaluating expression File `..\my_file.mdf' read error: The input file is either inaccessible or has no data available. What does this error message mean?
I want to install design kit but when I run a simulation the hpeesofsim window return to me "unable to locate "Auriga" library !!!! I check HOME/heesof/circuit/models and I find Auriga library in this directory. I don't understand... could you help me please.