Search Engine www.edaboard.com

Pad Generation

Add Question

6 Threads found on edaboard.com: Pad Generation
Suppressing pins in artwork generation?If yes this is used for vias or thru holes to remove the pad stub in inner layers wherever it is not connected..
well, to do a synthesis, you need the RTL code and the liberty file which define the std cells/pad/memories/custom macros, to generate a netlist in verilog usually. to insert the DFT (as scan chain), some synthesis tool could do it or used a dedicated tool, normaly the liberty with RTL or netlist is enough. to do the pattern generation, the netlist
Yep, a time delay difference is one way. I would carefully pad down the detector's inputs, and the source output (at least 3 dB each) so you do not get standing wave screwing with the phase. But a better way would be to get two synthesizers, both locked to the same 10 MHz reference. If one of the syntheisizers has a phase offset knob, you just
It is possible to use some of that 'strange' layers to aid in some special functions. For instance, I added this 'strange' Layer, only in the Bottom-side component pad, used at Test-points. At gerber generation, could be generated a map to that coordinates. +++
Dear Sir, I am trying to do pad frame generation. According to the ADK 3.1 guide book, it mentioned, "Step 3: In the ADK Library menu choose the pads to use from the appropriate library for your technology. Based on the technology, there may be different types of pads available. You can only use one set of technology (...)
Easy. Use the components from an old 2500-type touchtone pad. Two inductors, a couple of transistors,. and a few caps and resistors.