Search Engine www.edaboard.com

Usb With vb6

Add Question

Are you looking for?:
vb6 usb , vb6 and usb , and vb6 usb , usb vb6
12 Threads found on edaboard.com: Usb With vb6
I am usb to serial converter for serial communication with AVR microcontroller. The computer side program is in vb6. vb6 allows only fewer serial ports like com1, com2 etc. When I connect usb to serial converter, it connects to Port 11 on one laptop and com 20 on the other. Now the question is that from (...)
My project consist of a vb6 app, a serial to RS485 converter & a number of slave controllers with unique ID. The converter I am using is full duplex. 2 lines for sending & 2 for receiving. MAX232 & MAX488 are used in the converter. The program sends the slave ID with 9th bit set (i.e. Mark parity). The converter which has the same ID (...)
... i need the codes in vb 6.0 to solve my problem... Jan Axelson's HID Page has a vb6 example with source code for HID Class Device: The HID Page Some other vb6/HID examples: access HID
Search for usb method/ component in vb6.0 and then use "event-based-call". It may be possible if vb6.0 has usb method/ component.
I have done this 7 years back using vb6. I made a usb camera and connected it to the PC. My host Software was written in vb6. It was a straight forward implementation. -- Amr Ali
Hi you can use either a serial port or FTDI usb ->serial .Look in the doc of vb6 how to open serial ports and parallel ports . Is really very simple!
hi....i'm newbie here.i got a problem relate to read and write data using vb6 through my hardware using usb connection. is it impossible to do that in vb6?? if it is so, what should i do to connect my hardware with vb6??
My computer is Pentium Core 2 Quad with 2.40Ghz. My computer doesn't have Serial Port, so I am using a usb to Serial Converter, I have designed an electronic circuit attach to the serial port, which is dumping values in it @2400,8,n,1 baud rate. I had seen the output on hyperterminal, the circuit is working fine.Now I want my VB program to act like
Hi, I don't have example regarding cyusb.sys but you should consider using winusb.sys. Take a look here : Regards, Franck.
Hi, I am viswanath,i am working for Speck Systems Ltd,Hyderabad. I am facing problem when interfacing test instruments( NRT Power Meter,Agilent Spectrum Analyzer) with Prologix GPIB-usb converter using vb6.0. I did the same with Agilent PCI based Card,Agilent GPPIB-usb converter but not able to (...)
Need DMX512 from your PC via the usb port? Go to and check out the openDMXusb project. Also useful for anyone wanting to do RS232 <> usb communication as there is plenty of open software for the PC software like vb6 etc. The usb to serial conversion is done with the FTDI232 chip. No (...)
what do u use? parallel, serial, or usb port?